The instrument is a four-way temperature controller, can be accompanied by four infrared temperature sensor, sensor input type, alarm mode, control cycle are independent of each channel can be set, independent of the auto-tuning mode and PID parameters, w
1, input type (optional): CU50 (-50.0 ~ 150.0 ℃), Pt100 (-199.9 ~ 600.0 ℃),
K (-30 to 1300 ° C), E (-30 to 700.0 ° C), J (-30 to 900.0 ° C),
S (-30 to 1600 ° C), 0 to 5 V (-1999 to 9999), 1 to 5 V (-1999 to 9999)
Note: When the user specified a 1 input signal is 0 ~ 5V, 1 ~ 5V mold to signal, because of its hardware
On the thermocouple, the thermal resistance signal is not compatible, so its input type can not be changed to thermocouple, thermal resistance signal.
But the thermocouple, thermal resistance signal can be arbitrarily changed between the settings.
2, control: two-position control, PID control
3, relay output: relay 220V 5A (resistive load)
4, solid state relay drive signal: current greater than 15mA no-load voltage greater than 12V, the cycle of about 2S
6, the measurement accuracy: ± 0.5F · S ± 1 word, additional cold end make up error ± 1 ℃
7, the power supply: AC85 ~ 242V 50 / 60Hz power consumption: less than 4W
8, instrument work environment: 0 ~ 50 ℃, relative humidity ≤ 85% RH, no corrosive and no strong electromagnetic radiation
9, Dimensions (mm): 160 × 80 × 110 hole size: 156 × 76
96 × 96 × 110 hole size: 92 × 92
