Size | ![]() |
|||
Install type | Unshielded | |||
Model | DC | NPN | NO | LJ18A3-8-Z/BX |
NC | LJ18A3-8-Z/AX | |||
NO+NC | LJ18A3-8-Z/CX | |||
PNP | NO | LJ18A3-8-Z/BY | ||
NC | LJ18A3-8-Z/AY | |||
NO+NC | LJ18A3-8-Z/CY | |||
2 wires | NO | LJ18A3-8-Z/EX | ||
NC | LJ18A3-8-Z/DX | |||
AC | 2 wires | NO | LJ18A3-8-J/EZ | |
NC | LJ18A3-8-J/DZ | |||
3 wires | NO+NC | LJ18A3-8-J/EDZ | ||
Testing distance | 8mm ± 10% | |||
Setting distance | 0—7mm | |||
Lag distance | 10% less than Testing distance | |||
Test object | Magnetic metal (non-magnetic metal detection distance decreases) | |||
Standard test objects | iron 30*30*1mm | |||
Response frequency | DC:0.5kHz AC:25Hz | |||
Power voltage | DC type: DC12-24V (6-36V) pulsation (P-P) 10% or less, AC type: AC110-220V (36-250V) 50 / 60Hz |
|||
Withstand voltage | AC1000V 50/60Hz 1min Between the charging part and the shell | |||
Voltage effect | Rated power supply voltage range within ± 15%, rated power supply voltage within ± 10% detection distance | |||
Current consumption | N.P type: 13mA or less, D type: 0.8mA or less, type A: 1.7mA or less | |||
Control output | N.P type: 300mA or less, D type: 200mA or less, A type: 400mA or less | |||
Protection | N.P.D type: r everse connection protection, surge absorption, load short circuit protection, type A: surge absorption | |||
Ambient temperature and humidity | When operating, save: each -30- + 65 ℃ (No ice, no frost), action, save: each 35-95% RH |
|||
The effect of temperature | Temperature range -30- +65 ℃, +23 ℃, ± 15% within the detection range Temperature range -25- +60 ℃, +23 ℃, ± 10% detection within the distance |
|||
Insulation resistance | Over 50MΩ (DC500 megohm table) between the charging part and the shell | |||
Material | Shell: brass nickel plated detection: ABS | |||
IP rate | IP67(IEC) |